Nowadays, there are so many products of desktop headphone amp balanced in the market and you are wondering to choose a best one.You have searched for desktop headphone amp balanced in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings desktop headphone amp balanced which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
658 reviews analysed
1. Fostex USA Fostex Desktop Headphone Amplifier with DAC Balanced Output (HP-A4BL)
- Equipped with 4-pin XLR balanced output
- 1/4-inch unbalanced output
- Newly developed audio-grade capacitors
- highly precise crystal with low phase noise
- Playback 24bit/192kHz PCM and 11.2MHz DSD audio
- high performance DAC (Barrbrown PCM1792A)
- Asynchronous transfer up to 192kHz/24bit compatible with USB Audio 2.0
- HI/LO gain selection (10dB) for wider selection of headphones
- digital filter selecting roll-off characteristics and cut-off frequencies
The Fostex HP-A4BL High-Resolution DAC / Balanced Headphone Amp is a high resolution DAC and balanced headphone amplifier well suited for professional audio engineers, mastering engineers, and audiophiles. The HP-A4BL supports PCM audio up to 24-bit/192 kHz and DSD audio up to 11.2 MHz. The front-panel offers a balanced 4-pin XLR headphone output, an unbalanced 1/4″ stereo headphone output, while the rear-panel features stereo RCA outputs, optical S/PDIF I/O, and a USB 2.0 connector. The HP-A4BL has 2 gain staging levels, allowing you to boost the output of the amp by 10 dB without needing to touch the volume knob. The selectable filter allows you to cut-off lower frequencies if desired. Includes power supply, USB cable, and 4 rubber feet. Founded in 1973, Fostex is an acclaimed manufacturer of location sound, multi-track recording, and speaker products.
2. Monolith 124459 Desktop Headphone Amplifier and DAC with THX AAA Technology (Dual AKM 4493 Dacs & Dual AAA-788 Modules)
- The worlds most linear amp technology: the THX achromatic audio amplifire (THX AAA) ensures the ultimate no-compromise Headphone audio experience
- True balanced operation: Each THX stereo amp module operates in a bridged configuration to maximize output power for each channel, each DAC operates in mono mode
- Dual AKM 4493 DACs: new flagship 32-bit stereo premium DAC. It supports PCM inputs up to 768kHz and a direct stream digital input of 2. 8/5. 6/11. 2 MHz
- Balanced & single ended Headphone output: Compatible with all headphones and items
- Tailor your sound: Use the powerful digital tools to tailor the sound to your personal preference. Does your headphone have a little sibilance? Set a peq to tame that frequency peak
3. S.M.S.L SP200 THX AAA-888 Balanced Headphone Ampliﬁer with XLR RCA Input
- THX AAA-888 headphone ampliﬁer with THX AAA technology
- Balanced stereo headphone output, balanced stereo line input
- Fully protection with DC, Over-Voltage, Over-Current, Short-Circuit and thermal protection on headphone ampliﬁer
- High precision resistors for temperature stability, Pop-less design with high-Quality relays
- Ultra-Compact Design, Perfect for Desktop Systems
4. Massdrop x Alex Cavalli Hybrid Desktop Tube Amp – Audiophile Headphone Stereo Amplifier (CTH), 8.3 x 9.1 x 2.2 in, Black
- Built by legendary amp Engineer Alex Cavalli — from audio Legend Alexa Cavalli, the CTH hybrid amp combines a solid-state section, a tube-amp section, and an entirely new circuit design for unparalleled Audio performance.
- Ideal for Planar magnetic headphones — engineered to deliver the right amount of current for Planar magnetic headphones and the optimal voltage drive for dynamic headphones, The CTH gives you the most out of any headphone.
- Smooth and natural tube sound — The CTH amp comes equipped with a 6922 vacuum tube, which amplifies signal to create a smooth, natural, and resolving sound with precise detail and just a touch of tube character.
- Sturdy CNC-milled aluminum chassis — made from high-grade CNC-milled aluminum with a bead-blasted finish and silicone pads on its feet, the CTH is built strong and styled to fit any stack.
- Versatile outputs — connect your way with an RCA input and both 4-pin XLR and ¼ in (6. 3 mm) TRS headphone outputs.
- Connector Type: 1/4-Inch
- Connectivity Technology: Wired
- Included Components: Switching Power Supply That Handles 100240 Vac (Add Plug Adapter For Your CountryS Outlet)
Hybrid amp from a top-tier designerbuilt from the ground up by Alex Cavalli, a legend in the world of headphone Amps, This hybrid amp combines a solid state section, a tube amp section, and an entirely new circuit design. It delivers the current required by Planar Magnetics, along with the voltage drive that dynamic headphones need to perform their best. It’s quiet enough for sensitive headphones like the massdrop x Fostex TH-X00 and powerful enough for higher-impedance headphones like the massdrop x Sennheiser HD 6Xx. With the supplied 6922 vacuum tube, the sound is smooth, Natural, and resolving with precise detail and just a touch of tube character.
5. KGUSS DAC-K3 TPA6120 2.0 Mini HiFi Optical/Coaxial/USB DAC Decoder Audio Headphone Amplifier Headphone Preamp Desktop Amplifier 24BIT 192KHz OPA2134 AMP DC12V US Plug (Black)
- Unique volume control: When the DAC Headphone Preamp is connected to the speaker and the earphone at the same time, the earphone takes priority. After the earphone is unplugged, it automatically switches to the speaker. The volume button can adjust the RCA output. (The volume button of the decoder on the market can only control the earphone, can not control the RCA. )
- A variety of input and output modes: Headphone Amplifier can be PC-USB, optical fiber, coaxial three inputs, can be connected to TV set-top box, DVD, DCD
- output mode has RAC, 6.35mm headphone port 2, can be connected to power amplifier, tube vacuum amp, active speaker.
- Chipset: The mini headphone amplifier chip uses CM6642+ CS8416+ CS4398+ TOP6120A2+OPA2134+NE5532P to provide strong guarantee for tone input and output.
- Efficient protection and long life: The headphone audio amp uses OPA2134 and NE5532P two special op amps specially designed for audio. The op amp can be freely replaced and upgraded. At the same time, two relay protectors may protect the headphones and speakers.
- Quality Assurance: We are committed to providing customers with satisfactory products and services. We have 2 years of quality assurance. If you have any problems during the purchase and use, please contact us.
6. LOXJIE P20 Full Balance Tube Amplifier Headphone Power Amplifier (Black)
- Military grade 6N3 electronic tubes and carefully tuned circuits.Powerful drive circuit up to 600mW at 64Ω .
- Fully balanced headphone amplifier,including balanced input interface.
- Hi-End volume control NJW1195 produced by JRC Japan.
- Use relay for mute control.Humanized operation with memory function.
- Aluminum CNC,very fine workmanship.
7. Little Bear B4-X Portable Dual-Mono Vacuum Tube Headphone Amplifier; Mini Balanced Audio Headphone Amp B4 Upgrade Version
- The difference between B4 and B4-X: ① B4-X is a dual-mono balanced version. Its left and right channel are amplified by independent components, and power supply, tubes, and op amp are all independent and symmetric. So the degree of sound separation is higher than B4.
- ② B4-X adopts 2 groups of independent power supply(+12V and -12V) for 2 op amps, less mutual effects and can drive 300Ω headphones. ③ The circuit adopts dual op amp parallel output, with higher output power. ④ B4-X has 3.5mm and 2.5mm 2 kinds of output interface, suitable for most of balanced and standard headphones.
- Mini size and unique design: built-in tube makes you have a tube amplifier which can be held by one hand, convenient to carry and can enjoy HiFi music everywhere. Full, delicate and soft sound: warmer than transistors, independent op amp and power supply inhance the SNR and degree of separation, less interplay and higher sound quality.
- With built-in battery protection circuit: battery lets your listening feast without time limitation. It can’t be turned on during charging and will power off automatically after fully charged, and charger LED will turn to green.
- High-end making material and craft: using gold-plated socket, original nichicon electrolytic capacitor, original DALE resistors and precision ring resistance. Prompt and courteous customer service.
8. Mackie Mixer Accessory, 1-ch x 4 headphones (HM-4)
The ultra-compact HM-4 4-way headphone amplifier features a 1/4” stereo input and four 1/4″ headphone outputs with individual level controls. Perfect for studios or even at home when up to four people want to listen together.
9. iFi Hip-dac Portable DAC Headphone Amp Balanced for Android, iPhone
- PORTABLE DESIGN – Your music will never stop with up to 6 hrs of battery life and a slim, lightweight design perfect for carrying in your pocket wherever life takes you
- HIGH RESOLUTION AUDIO – From Spotify to Tidal MQA to MP3 and beyond, play any high res audio format with native digital to analog conversion so you can listen to any song the way the original recording was intended
- POWERFUL AMPLIFIER – Suited to your style, listen to in ear monitors or drive over the ear headphones with 400 mW max power output from the on-board amplifier
- EASY CONNECTIVITY – Connects directly to your smartphone with the USB Input, and works with balanced 4.4mm or S-Bal 3.5mm headphone plugs for ultimate convenience and versatility
- HIGH TECH – Power Match and XBass offer adjustable analog enhancements to customize your listening experience without compromising the digital conversion
10. Proster USB DAC DSD64 Headphone Amplifier Support Impedance 16-500Ω 3.5mm Portable Amp 192kHz/24bit Rechargeble HiFi Earphone Amplifier with Gain Switch for iPhone iPod MP3 MP4 Digital Player Computer
- 【HiFi Headphone Amplifier】Supports most headphones of high impedance 16-500Ω, signal-to-noise ratio>
- 100Db, THD + N = 0.0003%, fully filter noise, output remarkable sound without distortion.
- 【USB DAC Decoding Chips】ES9018K2M DAC professional chip decodes high sampling rate formats with a high signal-to-noise ratio and low distortion, perfectly compatible with all versions of iOS and Android device.
- 【Support DSD/PCM Format】Decoding SNR: 119dB 16-24bit/ 44.1-192kHz DSD64-DSD128Dop DSD64-128 (native), supports decoding of more formats with outstanding performance – decoding up to 192kHz/24bit PCM as well as up to DSD64.
- 【Gain Switch】Gain switch for matching output to headphone power needs. Gain: 0dB – 8.8dB. Output Power: 250mW in Impedance 16Ω. Adapted Headphone Impedance: 16-150Ω
- 【Excellent Details】1500mAH Lithium Battery supports headphone amp working over 8 hours
- Volume control knob for volume adjustment
- Charging Indicator for power checking.
By our suggestions above, we hope that you can found Desktop Headphone Amp Balanced for you.Please don’t forget to share your experience by comment in this post. Thank you!