665 reviews analysed
1. BriskHeat HSTAT101004 XtremeFLEX HSTAT Silicone Rubber Heating Tape With Adjustable Thermostat Controller, W x L: 1 x 48-Inch, 120VAC
Silicone rubber heating tape with adjustable controller, 1″ x 4′ heating tape, 288 watts, 120VAC, thermostat adjustable between 50F to 425F, maximum exposure temperature of 450F, moisture and chemical resistant, 6-foot power cord with plug.
2. Duda Diesel PHS Small Silicone Pail Heater Adjustable Thermostat 450W 110V/120V 790 mm x 102 mm, 4" Height, 0.06" Width, 31.1" Length
Designed for heating standard 5 gallon pails, both plastic and metal. This heater is controlled by an adjustable thermostat. Flexible springs are used to attach the silicone heater around various diameter drums. The springs can stretch up to about 3 inches. We carry insulated and non-insulated heaters. Insulated heaters resist heat from conducting out of the silicone and into the air. This insulation helps heat faster and also helps in retaining heat and saving electricity in the heating process.
3. Powerblanket PBL55F Full Coverage Drum Heating Blanket, 55 gal/208 L
- Fixed Preset internal thermostat prevents product temperature from going above 145 °F (± 5°F/3°C)
- 120 Volt, 400 Watts, 3.33 Amp Draw
- Safely heats valuable materials without scorching or burning
- Prevent waste by maintaining consistent temperatures
- Certified by ETL to UL and CSA safety standards
PBL55F: The PBL55F is an insulated full coverage drum heater specifically designed to fit a 55 gallon drum and encasing it fully in Powerblanket’s patented tough vinyl heating cover. The heater is built for use with 120 volts AC, drawing 3.33 amps thus producing 400 watts. It has a preset thermostat set to maintain up to a maximum 145 ºF / 63 ºC (± 10 ºF/5 ºC). The PBL55F full-coverage drum heaters allow you to safely control the temperature of expensive chemicals and other fluids; it delivers a barrier of directional heat where it’s needed most, the bottom 2/3rds of the drum, while still insulating the top third to help retain the heat – preventing fluids from freezing and maintaining optimal temperatures. This innovative heat-spreading technology insulates, protects and maintains heat in a wide variety of applications. And it’s certified by ETL to UL & CSA safety standards.
4. WarmGuard WG55F Insulated Full Coverage Drum Heating Blanket – Barrel Heater, Fixed Internal Thermostat Max Temp 145 F
5. Keenovo Plant Extraction Column Heater Wrap 12"x34" 110V 650W Spool Pipe Cylinder Heater Silicone Heating Blanket Jacket w/Thermostat of 0-80C
- This is a wonderful heat blanket to keep your pipe/cylinder warm and prevent a “sticky situation” (condensation) for components inside. Designed for pipes/cylinders/columns of 4″(OD) x 36″ (L). Other measurements can be made customly. More durable and rigid with reinforced silicone substrate(4 layers).
- Integrated with Rainbow adjustable thermostat of 0~80 Deg C for easy temperature control and avoid over heating. With velcro straps of over 10cm long to suits cylinders of various diameters.
- Size: 12″ X 34″ (305mm X 864 mm) Power: 650W @ 110V
- Straps + Metal Rings for easy mounting. Reinforced silicone substrate( double layers)
- Item Location: Shanghai, China
Important Notes: ——–1) Please make sure of a tight clamp to ensure proper and smooth heat transfer. ——–2) The heater is designed with a gap of about 1/2″ over the colmun, not for full coverage. ——–3) Please handle it with care. Do not bend or fold it sharply. Always lay flat or in big roll when not installed. ——–4) The thermostat, being mechanical, is not that accurate when compared with a PID controller and may fall behind the actual temperature. Please use extra thermometer to keep track of the real surface temperature.
By our suggestions above, we hope that you can found Adjustable Thermostat Silicon Heating Blanket for you.Please don’t forget to share your experience by comment in this post. Thank you!